Description
I call this the “ultimate” Dimer. Why? Because the original Cessna 305 flew two weeks before our FAC Dime Scale cut-off date! “Ultimate” as in “last”!
This kit builds fast and light, has flattened sides and bottom, but still retains the characteristic trapezoidal cabin cross section.
NOTE: the wooden prop shown in the photos is not legal for FAC Dime Scale as it is of multiple-piece construction. Test flight shows a Peck 6″ prop (legal).
Check out my build and design write-up HERE.
and my test flight video right here:
This SHORT KIT contains a plan and two sheets of laser cut parts.
My prototype used a 6″ Peck prop with a loop of 1/8″ rubber and came out at 11 grams ready to fly without rubber.
ALL VOLARE KITS ARE MADE IN SMALL BATCHES. IF STOCK-ON-HAND IS ZERO, A NEW BATCH WILL BE PRODUCED SOON. SIMPLY ORDER ANYWAY AND WE WILL MAKE THEM.
| Wing Span: | 16″ |
| Target Weight: | 12 grams |
| Prop: | 6″ |
| Rubber: | Loop of 1/8″ or 3/32″ |
| Nose Bearing: | 0.032″ or .047″ Peck or Gizmo Geezer |
| Shaft: | 0.032″ or .047″ |
| Peg: | 3/32″ Alum Tube |
| # of laser cut Sheets? 2 Kit? Short Kit Contest Winner? YES! |
 2022 AMA Outdoor FAC Dime Scale Champion |
3,174 total views, 1 views today
Reviews
There are no reviews yet.