VPS Stacked Prop Fixture Kit


You cannot Add to Cart until you
Login First


A kit to make an easy-to-use fixture to make stacked props.  This kit uses reusable ramps to properly locate your sticks on the fixture to create an accurate stacked prop of a desired pitch.

With this kit you can make “normal” (standard rotation) or “reverse” (use for counter-rotating twin engines or pusher props) props of any pitch from 4P through 15P (in whole increments).

The ramps are glued together and keyed to fit in the proper direction.  These ramps locate the first stick and ensure the proper spacing for all subsequent stick (up to a total of 20 sticks – I use 8 sticks for small props).

This kit is meant to be REUSABLE (don’t glue the ramps to the base!).  Use it over and over to make stacked props of any pitch and diameter within the range of the fixture.  It is designed to be used with the laser-cut sticks that we can provide, but you can make your own, too.

The kit comes with:

  • 2 bases (Normal and Reverse)
  • parts to assemble 2 ramps
  • 2 sheets of 6″ sticks for props
  • instructions

You can order additional laser-cut sticks in 6″, 8″ and 11″ lengths (HERE)


There are no reviews yet.

Be the first to review “VPS Stacked Prop Fixture Kit”

Your email address will not be published. Required fields are marked *