Designed for Scale appearance. As tested on my Peanut Ayres Loadmaster.
The Loadmaster was a prototype design and never fully produced. Promotional images show a 4-blade and a 6-blade prop. We will offer the 4-blade.
Recommended for a ~11 gram model flying on a loop of 3/32″ rubber.
Printed in heat resistant ABS. These props come with a basic clean-up performed. They are close to balanced, generally requiring no extra work.
Pre-sale preparation: these props take about 1 hour to print and about 15 minutes to manually clean up (light scraping and sanding) to get them ready for sale.
These props come with a NOMINAL 1/16″ shaft hole. This allows the user to bush it appropriately for their prop shaft.
These props DO NOT HAVE A RAMP. This allows the user to install their favorite clutch. I recommend a Garami-style or a Boehm-Style clutch.
A Garami-style clutch should utilize a Tube-In-Tube prop shaft. A Boehm-style clutch only needs one Tube bushed into the prop.
The spinner will have notches indicated for the appropriate blade count.
- Diameter – 5″
- Pitch – 6.5″
- Spinner – comes with a Spinner
- Weight – ~1 gram (prop) plus ~0.3 grams (spinner)
- Recommended Rubber – 1 loop 3/32″ (~11 gram model)
- Black (standard color)
Number of Blades:
- 4-blade, 5″ diameter
- White (no option)