Search the Blog
Volare Calculators
Volare Links
Organizations (External)
Discussions (External)
Archives
- January 2024 (2)
- December 2023 (1)
- September 2023 (1)
- July 2023 (2)
- June 2023 (2)
- May 2023 (1)
- March 2023 (1)
- February 2023 (1)
- January 2023 (3)
- December 2022 (4)
- November 2022 (1)
- October 2022 (3)
- September 2022 (1)
- August 2022 (1)
- July 2022 (2)
- June 2022 (1)
- May 2022 (2)
- April 2022 (1)
- March 2022 (3)
- February 2022 (2)
- December 2021 (3)
- November 2021 (2)
- October 2021 (2)
- September 2021 (2)
- August 2021 (3)
- July 2021 (1)
- June 2021 (2)
- May 2021 (3)
- April 2021 (3)
- March 2021 (1)
- February 2021 (2)
- January 2021 (1)
- December 2020 (4)
- November 2020 (3)
- October 2020 (4)
- September 2020 (3)
- August 2020 (2)
- July 2020 (4)
- June 2020 (2)
- May 2020 (2)
- April 2020 (4)
- March 2020 (4)
- February 2020 (8)
- January 2020 (2)
- December 2019 (3)
- November 2019 (2)
- October 2019 (2)
- September 2019 (3)
- August 2019 (2)
- July 2019 (1)
- June 2019 (2)
- May 2019 (3)
- April 2019 (1)
- March 2019 (4)
- February 2019 (2)
- January 2019 (6)
- December 2018 (3)
- November 2018 (5)
- October 2018 (4)
- September 2018 (2)
- August 2018 (1)
- July 2018 (3)
- June 2018 (3)
- May 2018 (4)
- April 2018 (2)
- March 2018 (5)
- January 2018 (5)
- December 2017 (1)
- November 2017 (1)
- October 2017 (2)
- September 2017 (7)
- August 2017 (2)
- July 2017 (3)
- June 2017 (4)
- May 2017 (3)
- April 2017 (4)
- March 2017 (6)
- February 2017 (4)
- January 2017 (3)
- December 2016 (7)
- November 2016 (6)
- October 2016 (2)
- September 2016 (5)
- August 2016 (2)
- July 2016 (5)
- June 2016 (1)
- May 2016 (1)
- April 2016 (3)
- March 2016 (4)
- January 2016 (3)
- December 2015 (3)
- November 2015 (6)
- October 2015 (3)
- September 2015 (4)
- August 2015 (5)
- July 2015 (4)
- June 2015 (3)
- May 2015 (4)
- April 2015 (3)
- March 2015 (4)
- February 2015 (1)
- January 2015 (9)
- December 2014 (2)
- November 2014 (3)
- October 2014 (5)
- September 2014 (6)
- July 2014 (2)
- June 2014 (4)
- May 2014 (3)
- April 2014 (2)
- March 2014 (5)
- February 2014 (5)
- January 2014 (6)
- November 2013 (6)
- October 2013 (5)
- September 2013 (5)
- August 2013 (5)
- July 2013 (6)
- June 2013 (9)
- May 2013 (7)
- April 2013 (4)
- March 2013 (6)
- February 2013 (4)
- January 2013 (3)
- December 2012 (3)
- November 2012 (2)
Follow Us on Facebook
Monthly Archives: January 2015
VPS Torque Meter
A fellow Cloudbuster asked me to make him a torque meter for Indoor use. He wanted a maximum of 2 inch-ounces and deflection in a single direction. We discussed and we thought a dual-use meter might work best. I plan … Continue reading
Posted in Builds, Customers, Products
Leave a comment
WANTED – Photos of Your Models!
I rarely get to see what becomes of the kits that I send out. That’s a shame, because I’d really like to see your builds. I will post them online and give you proper credit. Today, fellow Cloudbuster, John Jackson … Continue reading
Posted in Builds, Customers, Products
Leave a comment
Testing the Chambermaid NoCal
I drove up to Potterville, MI today for a short indoor testing session on my Chambermaid NoCal. It was very stable. I had this outside in December, but under very limited testing. With light breezes and very low winds, I … Continue reading
Posted in Builds, Products
Leave a comment
2015 NEW PRODUCT #5 – 1/2″ Balsa Gussets
The last product for today is a continuation of my “gusset series”. These are the largest ones to date: 1/2″ on the short side, made from 1/16″ sheet. These join the 1/4″ and 3/8″ gussets. Once again, this was a … Continue reading
Posted in Customers, Products
Leave a comment
2015 NEW PRODUCT #4 – KP Dual Ratio Winder
Here’s a BIG new product. I decided to start carrying this winder, just in case some of you might want one. KP dual ratio winder – Per KP themselves: “…suitable for larger models. Sturdy construction, smooth running and featuring an innovative … Continue reading
Posted in Products
Leave a comment
2015 NEW PRODUCT #3 – 2″ Balsa Wheel Kit
Similarly, a customer wanted laser-cut wheels for his Jimmie Allen Skokie. This is a set of 6 discs, laser-cut from 1/8″ balsa. Laminate 3 together for a 3/8″ thick wheel. Enough for 2 wheels (that balsa sheet is 12″ long!) … Continue reading
Posted in Customers, Products
Leave a comment
2015 NEW PRODUCT #2 – 1/32″ Balsa Embryo Wheels
January will see several new products – and they are coming in a hurry! We already saw teh Chambermaid NoCal Short Kit – here is Product #2 By request from a customer who primarily flies Indoor – “could you cut … Continue reading
Posted in Customers, Products
Leave a comment
New Year – New Kit: Chambermaid NoCal
Between Work, Holidays, and Inventory, I’ve been able to finish up the details on the latest kit: a Chambermaid NoCal SHORT KIT for outdoor flying. This was based on Bernard Guest’s Dime Scale (one of our best-selling kits) but required … Continue reading
Posted in Builds, Products
Leave a comment
Flying into 2015!
Well, I’m starting off 2015 in just the right way – with some outdoor Free Flight! This year wasn’t snowy like last year, and it was cold, but not frigid. Unfortunately, it was pretty windy. Given that, I decided to get out … Continue reading
Posted in Builds, Customers, Events, Products
Leave a comment